Type: | Pièces de machine-outil, pièces d'outil de construction, peu de perceuse de extraction, pièces d'out | Matériel: | carbure de tungstène de vierge de 100% |
---|---|---|---|
Application: | Perçage, exercices de roche, peu de perceuse de cône d'huile, anti-corrosif, approprié à faire le gi | Catégorie: | G206, G506, G208, G308, G211, G215, G510, G512, G513, G707, G806 |
Nom de produit: | Peu de fraisage, dents d'exploitation, morceau de carbure de tungstène, boutons de dôme cimentés par | Avantage: | Résistant à l'usure, usage ResistantSuperior, haute performance |
Couleur: | Gris, alliage noir | échantillon: | échantillons de bouton de carbure disponibles |
Dureté: | HRA89-HRA92.9, 87 HRA, 85-89.5 HRA | Préparation de surface: | Finition fondée, rectifiée et polie |
Nom des produits: | Pièces de machine-outil, boutons de carbure, boules de poinçon de haute qualité de carbure de tungst | Processus: | agglomération-HIPed, prepraring-pressing-agglomérer-traiter-finissage de poudre |
Forme: | sphérique, à couvercle plat, conique, astuces de foreuse, bolistic | Densité: | 14.05-14.95 g/cm3,14.14 g/cm3,13.90-14.90 |
Caractéristiques: | dureté élevée | Retour: | d'ici 24 heures |
Surligner: | Astuces de soudure résistantes à l'usure de carbure,pièces d'usage de carbure de tungstène de P.M.,astuces de soudure de carbure de P.M. |
Wear Resistant Wear Resistant Superior High Perfo carbide for construction engineering tools Milling Milling bits
Grade Introduction of Mineral | |||||||||||||||||||||
Grade | Co | Grain Size of WC | Hardness | Density | Flexural Strength | Bending Tough- ness | Elastic Modulus | Coeffi- cient of Thermal Expan- sion | Application | ||||||||||||
Co% | HRA | HV30 | g/cm3 | MPa | N/mm2 | GPa | 10-6/°C | ||||||||||||||
G206 | 6 | Medium | 90.8 | 1500 | 14.9 | 3200 | 530 | 4.9 | Suitable for DTH drilling with high wind pressure | ||||||||||||
G506 | 6 | Coarse | 88.0 | 1200 | 14.9 | 2500 | 530 | 4.9 | Suitable for gear shaper cutting of concrete and asphalt road | ||||||||||||
G208 | 8 | Medium | 89.1 | 1300 | 14.7 | 2750 | 510 | 5.1 | Suitable for DTH drilling with medium and low wind pressure,and rock breaking | ||||||||||||
G308 | 8 | Medium | 88.8 | 1270 | 14.7 | 2750 | 510 | 5.1 | Suitable for tri-cone drill bit in milling, and tri-cone | ||||||||||||
G211 | 11 | Medium | 88.0 | 1200 | 14.4 | 2800 | 478 | 5.6 | tri-cone drill bit in milling, drill bit in engineering | ||||||||||||
G215 | 15 | Medium | 86.8 | 1100 | 14 | 2800 | 430 | 6.3 | Suitable for oilfield composite sheet | ||||||||||||
G510 | 10 | Coarse | 86.2 | 1040 | 14.5 | 2700 | 490 | 5.4 | Suitable for rotary drilling cutter, and coal cutters | ||||||||||||
G512 | 12 | Coarse | 86.0 | 1030 | 14.3 | 2900 | 470 | 5.7 | Suitable for tunnel boring machine of scraper,cut- ter and wear plate | ||||||||||||
G513 | 13 | Coarse | 85.6 | 1000 | 14.2 | 2900 | 460 | 5.8 | Suitable for tunnel boring machine of scraper,cut- ter and wear plate | ||||||||||||
G707 | 7 | Extra Coarse | 86.3 | 1050 | 14.8 | 2200 | 520 | 5 | Suitable for hard rock in engineering, and DTH drilling cutter | ||||||||||||
G806 | 6 | Extra Coarse | 86.2 | 1040 | 14.9 | 2100 | 530 | 4.9 | Suitable for high rock of rotary drilling cutter |